plastic small chair injection molding machine with high qualoty and
output
Injection Molding Machine HJF240
Adjustment Unit
Automatic Mold Height Adjustment Saves the time and cost during the
mold changing.
Clamping Unit
The plates were designed using FEM software, ensuring a stable and
rigid clamping system. Five point inward moving double toggle
system ensures high rigidity and precision for mold clamping and
also reducing stress and Strain effects.
Hydraulic Unit
The hydraulic system using the world famous pump and control valve
can control the machine running precisely, ensuring the precision,
reliability and durability of whole machine.
Injection Unit
Dual-pillar supporting and dual-cylinder injection balance devices
ensure the stress on screw balanced during injection.
Specific screw and barrel designs are available for processing
different material requirements.
Electronically Controlled Unit
1.CPU controller and display are independent and reliable.
2.A larger color LCD screen enhances clear display and supports
Multi language compatibility.
3.The control system also supports remote monitor. In the event of
a control problems, the machine can be connected to internet
through a special interface. Inject service can realize remote
fault diagnosis and maintenance.
4.A screen saver function extends the LCD life.
5.Ultra bright LED is provided for input and output point
inspection. Proving convenient indication of the machine’s
operation and machine service
6.A data hardware lock is provided to prevent unauthorized people
from effecting the machines performance.
7.Closed Loop PID barrel temperature control.
8.Dust and waterproof control cabinets provide a neat and tidy
enclosure all electrical control components.
| SPECIFICATION | HJF240 |
| Screw Type | A | B | C |
| Screw Diameter | Mm | 50 | 55 | 60 |
| Screw L/D Ration | L/D | 22.2 | 20 | 18.2 |
| Shot Size(Theoretical) | cm3 | 508 | 593 | 706 |
| Injection Weight(PS) | g | 462 | 534 | 642 |
| Injection Rate | g/s | 148 | 179 | 202 |
| Injection Pressure | MPa | 180 | 160.8 | 128 |
| Screw Speed | rpm | 0~180 |
| Clamping Force | KN | 2400 |
| Opening stroke | Mm | 490 |
| Space Between Tie Bars | mm | 530*510 |
| Max.Mold Height | mm | 530 |
| Min.Mold Height | mm | 200 |
| Ejector Stroke | mm | 165 |
| Ejector Tonnage | KN | 70 |
| Max.Pump Pressure | MPa | 16 |
| Motor Power | KW | 25.1 |
| Heater power | KW | 11.65 |
| Machine Dimension(L*W*H) | M | 5.4*1.5*2 |
| Machine weight | T | 7 |
| Oil Tank Capacity | L | 340 |
Haijiang Machinery Main configuration
Standard machinery
| PLC | PORCHESON (TAIWAN) |
| Vane Pump | Albert (USA) |
| Directional Valve | Northman(TAIWAN) /Yuken(JAPAN)/Tokimec(JAPAN) |
| Proportional Valve | HNC (TAIWAN) |
| Electric Motor | Qianlima (CHINA ) |
| Contactor | LS (KOREA) |
| Plasticizing Oil Motor | STF(CHINA) |
| Air Breaker | LS (KOREA) |
| Thermal Overload Relay | LS (KOREA) |
| Limit Switches | Omoron (JAPAN ) |
| Liner Position Sensors (Electric Ruler) | Minor (China) |
| Lubrication Pump | ChaoRun(China) |
Servo machinery
| PLC | PORCHESON (TAIWAN) |
| Directional Valve | Northman(TAIWAN) /Yuken(JAPAN)/Tokimec(JAPAN) |
| Air Breaker | LS (KOREA) |
| SSR(solid state relay) | Fotek(TAIWAN) |
| Plasticizing Oil Motor | STF(China) |
| Limit Switches | Omoron (JAPAN ) |
| Gear Pump | SUMITOMO (JAPAN) |
| Servo Driver | DELTA (TAIWAN) |
| Servo Sensor | ASHCROFT(GERMAN) |
| Servo Motor | Albert(USA)/Phase(ITALY) |
SPARE PARTS( FOR FREE)
| 1. Mold clamping with bolts: 8PCS, | 2. Nozzles: 1PCS, |
| 3. Toolbox: 1SET, | 4. Heating Band: 2PCS, |
| 5. Lubrication Oil: 1 Bucket | 6. Limit Switch: 2PCS, |
| 7. Hexagon Wrench: 1SET, | 8. Thermocouple: 2PCS |
| 9. Seal Ring: 2PCS, | 10. Machine shockproof pads: 6PCS, |
| 11. Vise: 1PCS, | 12. Power socket for auxiliary machines: 2PCS, |
| 13. Wrench: 1PCS, | 14. Screwdriver: 2PCS, |
Q1. What is the warranty for the injection molding machine
A1:Total 18 month,Included machine platen,base,injection
unit,clamping unit.
Q2:Can you sending engineer to oversea install machine and
trainning customer's workers.
A2: Yes,We will send engineer to customer factory install the
machine or trainning customer's workers. in one week,total free.
After one week, 50$ per day
Q3:How Many spare parts you will prepare for customer?
A3: Spare parts included: mould clamp, long and short
nozzle,heating band,Wrench,Switch,Thermocouple,Operation manual
Tool box,Lubricate Oil,Sealing,Filter etc.
Q4:Computer sytem,Except English, can you change other
language,say: French,Spanish,Arabic,Russian.
A4:Yes,when you place order,please tell us the language which you
required. Standard one with English,Japanese,Chinese,Korea.
Q5:Can you change the power source for us? Say:we need 3 Phase 220V
60HZ
A5: When you place order,please write clearly.Then we will change
the electric system for you.
Q6:If i Need Green Color machine,can you do it for us?
Q6: Yes,please give us the color sample.So we can do it for you.
